Description

Asian Paints Smartcare PU Magnum US Grey 25 Kg

Asian Paints Smartcare PU Magnum US Grey 25 Kg is single component waterproofing liquid membrane, offering superior mechanical and chemical properties, as the same is based on pure, elastomeric, polyurethane resin. This product is designed to be applied over concrete surfaces which must be laid over by a protective cement screed.

* Area of Application Asian Paints Smartcare PU Magnum US Grey 25 Kg:

• Flat roofs, balconies, podiums, and other concrete surfaces.
• Underneath tile layers in kitchen & bathrooms.
• Under thermal insulation layer on flat roofs.

* Precautions:

• Surface preparation – remove surface undulation by using repair polymer or polymer modified plaster.
• Rate of application of epoxy primer 100 g -150 g for per square meter. For porous/absorbent floor, additional coat of primer is recommended.
• Moisture content (%) of primed surface should be less than 4% prior to SC PU Magnum US application.
• Rate of application per coat should be 700-800 gm per square meter.
• Time interval between 2 coats – 8-24 hrs depends on atmospheric condition.
• Epoxy primer drying time 16 – 48 hrs depends on atmospheric condition.
• New concrete should be fully cured and dry before application of SC PU Magnum US.
• Long felt roller should be used for application to avoid air entrapment in wet film.
• The technical parameters shared are typical values obtained in controlled lab testing.

Physical Parameters:

• Colour – Grey
• Packaging – 25 kg
• Shelf Life – 12 months from production date, if stored in original, unopened packaging, at temperatures between +5 C and +35 C. Protect from direct sun exposure and frost.