Description
Asian Paints Smartcare CrackSeal 5Kg
Asian Paints Smartcare CrackSeal 5Kg is a ready to use fiber glass reinforced crack filling compound for both interior and exterior surfaces. It ensures unmatched crack bridging ability for plaster cracks of up to 3 mm.
TECHNICAL DETAILS:
a. Form: Ready to use paste.
b. Density at 25ºC: 1.28
c. Drying Time: Minimum 6 hours depending on temperature and humidity.
d. Flash Point: Crack Seal is a water based which is not flammable.
e. Consumption: 75 – 80 running feet / kg / 2 coats (3mm wide and 5mm deep).
APPLICATION PROCESS:
CLEANING: Open the cracks and widen the cracks to form a ‘V’ shaped groove. This will provide a strong base for adhesion of CrackSeal to the substrate. Clean the area thoroughly to free it from dust and loose particles. It is recommended to use a cutter for opening the cracks.
PRIMING: Post cleaning apply Primer in the opened cracks. For interior cracks, use Asian Paints Deco Prime water based Primer and for exterior cracks, use Asian Paints Exterior Primer (as per regular dilution of 100% with water).
- STEP 1: FIRST COAT SMARTCARE CRACK SEAL PUTTY KNIFE / TROWEL.
- STEP 2: SECOND COAT SMARTCARE CRACK SEAL PUTTY KNIFE / TROWEL.
- STEP 3: LEVELING, LEVEL THE WALL USING ASIAN PAINTS WALL PUTTY.
- STEP 4: PRIMER AND TOP COAT, CONTINUE NORMAL PAINTING USING PRIMER AND TOPCOAT.
1. Apply Crack Seal at least 3 cm on either side of the crack for better adhesion.
2. Apply an additional coat of Crack Seal in case of severe dampness.
3. For best results, follow the recommended application procedure.
PRECAUTIONS:
- Do not apply for cracks of more than 3mm width.
- Do not apply on wet surfaces.
- Meant for plaster cracks. Do not apply on structural on joint cracks.
Reviews
There are no reviews yet.