Description

Walltron Hydro Epoxy 2Kg

Walltron Hydro Epoxy 2Kg is a two-pack, solvent-free Water Compatible epoxy resin material consisting of base and hardener. The mixed material upon curing forms a non-toxic hygienic tough film which is compatible with potable water and foodstuff contacts. It is available in white color and is supplied in pre-measured quantities.

NIPPON PAINT
Walltron Hydro-Epoxy (Water compatible food grade epoxy)

USES of Walltron Hydro Epoxy 2Kg:

• Hydro-Epoxy is used for lining and waterproofing potable water retaining structures and surfaces subject to contact with foodstuffs.
• The cured film is resistant to corrosion, chemical attack, and abrasion and is suitable for application to reservoirs, tanks, silos, water treatment works, breweries, dairies, meat and food processing plants.
• The cured film is non-toxic and meets the requirements of IS: 9833 – 1981. It can also be used as a prime coat before interior and exterior top coat application.
• It can be used for water reservoir structures like hatcheries and aquariums.

DESIGN CRITERIA for Walltron Hydro Epoxy 2Kg:

• Hydro-Epoxy is designed to be applied in two coats to achieve a minimum total dry film thickness of 200 microns. To achieve the correct protective properties, Hydro Epoxy must be applied onto the substrate at the sprayed rates recommended.

APPLICATION TEMPERATURE:

• Hydro-Epoxy must be applied in temperatures between 10°C and 40°C. Application at temperatures below 10°C should be avoided, nor when the relative humidity exceeds 90%. Although Hydro-Epoxy may be applied to damp concrete, there must be no standing or running water. Under adverse conditions such as low temperature and/or high humidity, a white bloom may appear on the surface, though this does not affect the performance of the coating.

PACKAGING: Hydro-Epoxy is available in 2 Kg pack.

COVERAGE:

Hydro-Epoxy covers 5.0 m² per kg per coat at 90-100 microns thickness. The coverage figure is theoretical; due to wastage factors and the variety and nature of substrates, practical coverage figures may be substantially reduced.

STORAGE:

• Shelf life: 12 months if kept in a dry store between 5°C and 30°C in the original, unopened containers.
• Storing in dry conditions at temperatures between 5°C and 30°C in the original unopened containers is recommended. If stored at high temperatures, the shelf life may be reduced.

PRECAUTIONS:

• Hydro-Epoxy should not come into contact with skin and eyes or be swallowed.
• Adequate ventilation should be ensured, and inhalation of vapors should be avoided. Some people are sensitive to resins, hardeners, and solvents; hence, suitable protective clothing, gloves, and eye protection should be worn. The use of barrier cream provides additional skin protection. In case of skin contact, it should be rinsed with plenty of clean water, then cleansed with soap and water (solvent should not be used).
• In case of eye contact, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately (vomiting should not be induced).
• Fire: Hydro-Epoxy is non-flammable.

Top Trending Keywords:

food grade epoxy resin for potable water tanks | nippon hydro epoxy | non-toxic epoxy coating for water reservoirs | Nippon Paint 2 Kg Walltron Hydro-epoxy | walltron hydro epoxy price | waterproof epoxy for concrete water tanks | food grade epoxy hydro epoxy | eco-friendly epoxy for food storage areas | nippon walltron hydro epoxy | easy-to-clean epoxy coating for water tanks | chemical-resistant epoxy for breweries and dairies | Walltron Hydro-Epoxy | walltron hydro epoxy food grade | walltron hydro epoxy food grade price | Food Grade Epoxy Coatings.